Elegoo Centauri Carbon Detector mount

Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print.

For Batch 3 I modified the base. Enjoy it!

Any feedbacks are welcomed!

You will need:

- x2 M3 8mm screws
- x2 crews from detector
- x2 M3 nuts OR x2 M3S heat inserts for Batch 1&2 only

Print settings:
- 0.16mm layer height
- 4 wall
- 20% infill
- no support

for Batch3:
- support Enabled
 

Assembly:
 - Insert x2 M3 nuts OR M3S into Part3
 - Insert part1 in part2. Screw part2 to Filament Detector
 - Insert Part2 in Part3. Turn Part2 90 degree to fit in. Screw Part3 to the side panel with x2 M3x8mm screws.