Icarus Falling Hueforge

Icarus Falling
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm on a Creality k1c

The Model is 112.64x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Gray Transmission Distance: 3
PLA eSun Bone white Transmission Distance: 1
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #13 (1.12mm) swap to Bone White for the rest.

At layer #2 (1.62mm swap to white for the rest

Use rectilinear infill and 0.08mm layer height. Base layer 0.16mm