Raspberry Pi 3 Case for PiTFT 2.8 LCD and LiFePO4 UPS

Enclosure for Raspberry Pi 2 or 3 with the Adafruit 2.8" PiTFT touchscreen lcd

Adafruit PiTFT used: https://www.adafruit.com/product/1601

This has the LiFePO4 UPS from here: https://lifepo4wered.com/lifepo4wered-pi+.html

With the two models I remixed a version that works for my Raspberry Pi 3 B+ and the older PiTFT I had hanging around. Due to the LCD overhang, a bit of remodeling was required of the remix.

I manually added the holes for the LCD after the print was complete, and I may model that in for the next revision.

You will need a bit of hardware to put it together.

• M3 x 40 cap head screws for the case.
• 4-40 x 1/2" screws for the LCD.

Print instructions

Category: Electronics Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: No

Supports: No

Resolution: 200um

Infill: 20%

Filament: Spool3D PLA