Raven/Crow remixed for easy mounting

Crows are kind of special around here (though this is probably more like a raven..).  I wanted a silhouette to put on a board at top of an arbor in our yard and found this design by Jura Švébiš here on Printables.  But gluing the shapes to the arbor was not a practical approach.  Several of the pieces were unattached from the main part.  Mounting with screws is also more practical where I wanted to hang this so I added provision for 4 screws.

If using this outdoors, print in a filament type that can handle UV and weather (ASA or PETG ideally – I used ASA-CF).

There are two versions, one with the screw holes inset by 2mm and one without the inset should anyone want to use with the printer-bed surface outside.

All of the remixing was done using features of the OrcaSlicer.

There is also a backing disk designed for this at https://www.printables.com/model/1261234-round-background-or-moon-to-back-crow-and-raven-mo

Attached several pieces that were floating from the main sculpture and added 4 holes for screws (black screws of course) to make it more practical for mounting, particularly outdoor mounting.  

The beak and eye shape is more like a raven than a crow, so there is another version modified to look more like a crow at https://www.printables.com/model/1261216-crow-outline-for-mounting-less-like-a-raven