Articulated Scalemail Bracer

Printing Settings

Printing Settings

- Filament Material: PLA

- Layer Resolution: 0.2 mm

- Infill Percentage: 15%

- Supports: No

- Brim: No

- Bed Temperature: 60°C

- Nozzle Temperature: 210°C

Printing Information

- Nozzle Size: 0.4mm

- Estimated Printing Time: Approximately 19 hours 9 minutes

- Print Volume: 198mm (width) x 210mm (depth) x 13mm (height)

- Printer Used: Prusa i3 MK3S

- Slicing Software Used: PrusaSlicer

Additional Information

Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.