Pegboard Ziptie/Dowel/Gluestick Holder (Adjustable)

This cable tie / zip tie organizer is made to fit a standard 1" O.C. pegboard. It is printed as two pieces and requires minimal support. It could also be used to store things like pins, dowels, rods, glue sticks, etc.

Minimum length of stored parts is 3.5", however the two halves can be spaced apart basically infinitely. If being used to store long flexible stock, additional top rings may be needed to prevent flexing.

Print orientation as shown in the photos. Standard PLA with standard profile is sufficient. 

Fitment is intentionally tight, it will require some gentle force to install. If excessive force is needed, you may have to trim the edges of the curved pegs as shown in the photo. Flush cutting pliers should accomplish this pretty easily.