Soadastream CO2 Cylinder Clip Cap

I needed a simple lid that can be put on the refilled Sodastream cylinders so that they can be stored without any problems.
 

Print Settings:

• Printer:                Prusa Mini
• Rafts:                    No
• Supports:           No
• Support type:   n/a
• Nozzle:                 0.4 mm
• Resolution:        0.2 mm
• Perimeter:         3
• Infill:                     15%
• Infill type:           Grid
• Filament:            PLA

Notes:
Print the part upside down.