Balled Corner Protector w/ Flat Bottom

Dimensions

Size: 39x39x36.5 mm^3
Sphere diameter: 35 mm
Covers 30 mm of the corner in all axis

Print

—Tested for Crealty K1 Max w/ standard 0.24mm profile—
Filament: Generic ABS—For impact resistance ABS is superior to PLA.
Layer Height: 0.24 mm—For max speed; use lower setting for higher fidelity.
Wall loops: 2 to 4—2 for softer outer shell and 4 for high impact resistance.
Infill: 15 to 40—15 for better cushioning and 40 for high impact resistance.
Infill Pattern: Cubic
Time: 11 to 15 min
Material: 2.2 m / 6.5 g to 3.4 m / 10 g

I added a flat bottom so that no supports are needed. Does also increase the bottom print quality, especially with ABS, and the print speed.