Pink Panda 3D Printed Bookmark – HueForge Multi-Color Design

Pink Panda 3D Printed Bookmark – HueForge Multi-Color Design 🐼🌸

⚠ Note: The model may appear black in the preview, but don’t worry—it reveals its full color magic after slicing with filament swaps!

Add a splash of color and a touch of calm to your reading time with this HueForge-optimized panda bookmark! Featuring a sweet panda surrounded by vibrant cherry blossoms, this 3D print combines soft gradients and bold contrasts to bring the design to life with every layer.

Perfect for panda lovers, cozy readers, and HueForge fans alike, this project is both a charming accessory and a fun multicolor print challenge.

🎨 Filaments & Color Swap Instructions:

This design uses 4 unique filaments for depth, detail, and color contrast:

• Start with Pink
• At layer #7 (0.64mm), swap to Black
• At layer #8 (0.72mm), swap to Blue Gray
• At layer #17 (1.44mm), swap to White (for the rest)

🛠 Filaments Used:

✔ PLA BambuLab Basic Pink – Transmission Distance: 8
✔ PLA PolyLite Black – Transmission Distance: 0.3
✔ PLA BambuLab Basic Blue Gray – Transmission Distance: 3
✔ PLA BambuLab Basic White – Transmission Distance: 5

✅ Recommended Print Settings:

• Layer Height: 0.08mm (for fine details)
• Base Layer Height: 0.16mm
• Infill: 100%
• Model Size: 66.67 x 200 mm
• Actual Depth: 2.2 mm

🔗 Want to sell prints?

Commercial use is available through my MakerWorld profile – all past and future designs included with membership.
📍 https://makerworld.com/en/@Lilith3dPrint

🙌 Thanks for your support, and happy printing!