Violet Husky 3D Printed Bookmark – HueForge Multi-Color Design

Violet Husky 3D Printed Bookmark – HueForge Multi-Color Design 🐺💜

⚠ Note: Model may appear black in the preview but will show all beautiful colors after slicing with proper filament swaps!

Show off your love for majestic pups with this HueForge-optimized 3D printed bookmark featuring a detailed husky portrait in cool violet and pink tones. With smooth transitions and high contrast, this design stands out with personality and style—perfect for dog lovers and fans of unique prints.

Whether you're curling up with a good book or gifting a fellow husky fan, this multi-color bookmark is sure to turn heads!

🎨 Filaments & Color Swap Instructions:

This design uses 4 unique filaments to achieve its multi-layered look:

• Start with Black
• At layer #8 (0.72mm), swap to Temp Purple-Pink-Translucent (Cold)
• At layer #11 (0.96mm), swap to Pink
• At layer #14 (1.2mm), swap to White (for the rest)

🛠 Filaments Used:

✔ PLA PolyLite Black – Transmission Distance: 0.3
✔ PLA PolyLite Temp Purple-Pink-Translucent (Cold) – Transmission Distance: 5
✔ PLA BambuLab Basic Pink – Transmission Distance: 5
✔ PLA PolyLite White – Transmission Distance: 5

✅ Recommended Print Settings:

• Layer Height: 0.08mm
• Base Layer Height: 0.16mm
• Infill: 100%
• Model Size: 42 x 145.24 mm
• Actual Depth: 1.9 mm

🔗 Want to sell prints?

Commercial use is available through my MakerWorld profile – all past and future designs included with membership.
📍 https://makerworld.com/en/@Lilith3dPrint

🙌 Thanks for your support, and happy printing!