Magical Train Station 3D Printed Bookmark – HueForge Multi-Color Design

Magical Train Station 3D Printed Bookmark – HueForge Multi-Color Design 🚂✨

⚠ Heads up: The model may appear black in preview, but the magic appears after slicing with the correct filament swaps!

Capture the wonder of a magical journey with this HueForge-optimized 3D printed bookmark! Featuring a majestic steam engine departing from a glowing, enchanted station, this layered design blends dramatic contrast with warm tones to create a piece full of mystery and nostalgia. Perfect for fantasy lovers, readers, and fans of legendary train rides.

🎨 Filaments & Color Swap Instructions:

This print uses 4 unique filaments to create a fiery and golden visual depth:

• Start with Black
• At layer #8 (0.72mm), swap to Orange
• At layer #14 (1.2mm), swap to Yellow
• At layer #19 (1.6mm), swap to White (for the rest)

🛠 Filaments Used:

✔ PLA PolyLite Black – Transmission Distance: 0.3
✔ PLA BambuLab Basic Orange – Transmission Distance: 5
✔ PLA BambuLab Basic Yellow – Transmission Distance: 5
✔ PLA BambuLab Basic White – Transmission Distance: 5

✅ Recommended Print Settings:

• Layer Height: 0.08mm
• Base Layer Height: 0.16mm
• Infill: 100%
• Model Size: 48.33 x 145 mm
• Actual Depth: 2.6 mm

🔗 Want to sell prints?

Commercial use is available through my MakerWorld profile – all past and future designs included with membership.
📍 https://makerworld.com/en/@Lilith3dPrint

🙌 Thanks for your support, and happy printing!