Parametric Indoor Golf Simulator TeePU Golf Tees

Create custom indoor golf tees of any size for use in a golf simulator. A selection of standard sizes from 25-55mm has been included as .3mf files. By using the .f3d model, tees can be adjusted to any height using the Modify > Change Parameters function.

Use of the parametric model requires installation of the ParametricText add-in for Autodesk Fusion: https://apps.autodesk.com/FUSION/en/Detail/Index?id=2114937992453312456

Recommended print settings:

• TPU
• No top or bottom layers, 0% infill
  • spiral vase mode with 1.2mm wide extrusions recommended OR
  • 1.2mm thick walls (2 x 0.6mm or 3 x 0.4mm)