Kenwood RD-VH7 CD-Receiver stand replacement / spare part (Standfuß)

As the second original stand for my Kenwood RD-VH7 CD-Receiver was missing somehow, I decided to re-create it and use my printed ones instead.

Using some metal / silk looking filament will result in a nice finish.

Print the stand vertically to get a nice finish of the curved part.

For the rubber part, use some EPDM self-adhesive, anti-slip pads with a diameter of 45 mm and a thickness of 2.5 mm. I took this one:
Adsamm® / 10 x Selbstklebende Antirutsch Pads aus EPDM Zellkautschuk/ø 45 mm/Schwarz/Rund / 2.5 mm Starke Anti-Rutsch-Gleiter : Amazon.de: Baumarkt