Eggsecutor!

Eggsecutor was left in the basket for a reason. With a grin full of secrets (and maybe teeth that shouldn’t be there), this little troublemaker brings a chaotic twist to any Easter display. He’s eggstremely confident, mildly unhinged, and absolutely up to something.

The little green one was painted however I have included a 3mf file suitable with colour printers!

UPDATE: IMPROVED PRINTABILITY — Thanks to some awesome feedback, the Eggsecutor just got even easier to print!

• Inner hole slightly reduced and reshaped for a cleaner look
• Model now prints in place with a flat slice at the bottom, positioning the egg at a slight angle — this helps reduce visible print lines and improves overall print quality
• No supports required — the model has been modified with a flat base for easier printing

Updated files are named improvedPrintabilityEggsecutor (and similar variants)

Print Settings:

I used auto tree supports in junction to the mini support you will see during slicing, after print is complete its satisfying to take the tree supports off and have a fully round egg model!

Layer Height: 0.1-0.2mm, Infill Density: 15%, Infill Pattern: Default slicer or experiment with other patterns!, Print Speed: 50–60 mm/s, Support Type: Auto Tree, Bed Temperature: 60°, Material: I have only used PLA so far!