E3D V6 mount for Ender 3 w/ BL Touch

This was optimized for rigidity, by doing so the build plate is reduced by 5-10mm in the X axis. I also added an additional 4010 turbofan for added cooling as I am running this printer at fast speeds. If you are running a slower printing speed the original Ender 3 fan may be enough.  

Hardware Required from stock Ender 3

BTT V3 E2 Mainboard (not required but thought I would note it as it's what I am using)

E3D V6 Hotend

BL Touch  (probe offset: X = -42, Y = 14.15)

Additional 4010 Turbo Fan

Hardware:

• M3 Heat Set inserts QTY:4
• M3 x 8mm QTY:10
• M3 x 12mm QTY:2
• M3 x 16mm QTY:2
• M3 x 6mm QTY:4

Printed PETG Components (6 total):

• Left and right fan shroud
• Left and right fan mounting plates
• Heat sink clamp
• V5 mount