Dick Hot Dog

Hot-dickity-dog! 

Get ready to ruin the family barbeque and offend your grandparents…. I made this dick hot dog in Blender and thought it would make a great magnet or standalone sculpture. I've included the STL files for a version with onions and one without for those who are averse to onions as a topping. 

Bon Appétit!

Please note that this was not a multicolor print, I printed mine in matte PLA and then painted the final product for the result pictured. The two STL files have flat bottoms with no recessions, but the 3MF file has 2 negative spaces on the bottom that are sized for 20x20x2mm round magnets (or alter the size to fit a different sized magnet).  

Here are the settings that I used for a 0.4mm nozzle on my Bambu Lab P1P:

Layer Height: 0.16mm with 0.2mm base layer
Infill: 15% (Gyroid)
Supports: Automatic Supports, Normal Snug

License Information:
This model is licensed under Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA). You may share, copy, and redistribute the file for non-commercial purposes with proper attribution. Modifications must remain under the same license. Selling this model or modified versions, either digitally or as physical prints, is strictly prohibited.

Selling physical prints of my 3D designs is only permitted if you are an active member of my 3D Print Commercial License tier on Patreon. 

Support my creative work or obtain a Commercial License to sell 3D prints of my designs by visiting my Patreon page: https://www.patreon.com/c/FowlMouthedArt

More of my art can be seen on Instagram: https://www.instagram.com/fowlmouthed/

You can check out my website at www.janis-fowler-art.squarespace.com for more of my paintings and sculptures. (Warning, some NSFW artwork is featured on the website.)

I plan on making YouTube content in the future. Don't forget to subscribe if you're interested in seeing more! https://www.youtube.com/@FowlMouthedArt

For any questions or business inquiries, feel free to reach out via email at: [email protected]