Sega DreamCast PicoPSU Adapter

Simple adapter to fit a PicoPSU to a Sega DreamCast to replace the original power supply. Uses original power supply mounting position while the PicoPSU is held by a clip-in holder. Needs an MTA-156, 6 position rectangular receptacle connector IDC Tin 24 AWG with optional dust cap (Conrad part numbers 1278396 - 62 and 1278434 - 62 | Digi-Key part numbers A31632-ND and A19804-ND), or you can re-use the original connector if you desolder it from the original power supply PCB.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Yes

Resolution:

0.3 mm

Infill: 

25 %

Filament:
Prusament PLA Galaxy Black

Post-Printing

Solder the original power switch to the pins 15 and 16 on the PicoPSU (ground & PS ON). Using it to switch the power on the input lines of the PicoPSU can lead to undesired behaviour when power cycling the DreamCast too quickly.