Detroit Pistons Magnet (Low Waste)

Detroit Pistons Magnet - 3D Print

Show off your team pride with this Detroit Pistons magnet! This 3D print uses three filament swaps to create a clean, layered design—no painting needed. It includes a recessed 8x3mm magnet slot on the back (easily resizable), making it easy to display on any fridge, locker, or toolbox.

🔥 Print Details:

• Size: 100 x100 mm
• 100% infill, 0.2mm layer height
• Depth: 5.4mm
• Filament Usage: 23.53g
• Print Time: 52m
• Three filament swaps, lower waste & wear
• No ironing required

⚠ Filament Tips:

• Basic Gray is used for the rim, but it can be swapped for Light Gray or left out entirely if preferred.

🎨 Filament Swaps & Layers:

• Start with Red
• At layer #19 (3.8mm), swap to Blue
• At layer #22 (4.4mm), swap to Gray (optional rim)
• At layer #24 (4.8mm), swap to Ivory White for the rest

🎨 Required Filaments & Transmission Distances (TDs):

• PLA BambuLab Basic Red – TD: 4
• PLA BambuLab Basic Blue – TD: 3.5
• PLA BambuLab Basic Gray – TD: 0.9 (rim, optional)
• PLA BambuLab Matte Ivory White – TD: 3.5

🏀 Designed in Hueforge, this print keeps filament waste low while delivering a bold, clean look for any Pistons fan!