Vectrex Controller Plug

Printable case to built a Vectex Controller Plug.
Needs a 9 Pin D-SUB female connector (Conrad part number 1401502 - 62 | Digi-Key part number 732-618009221923-ND) and a anti-kink sleeve for 4mm cables (Mounting hole is 6mm x 4.5mm, 2.8mm wall thickness, - I used "Knickschutz für 4mm Kabel" from ab-elektroshop)

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.1 mm - 0.2 mm

Infill: 

20%
Filament:
Prusament PETG Galaxy Black 

Post-Printing

• Remove the metal shell from the D-Sub connector
  (drilling out the hollow rivets works best)
• Shape the plastic inset to match the mounting hole in the printed part
  (you need to cut or sand down the two lower edges, see image of parts)
• Mount the anti-kink sleeve by pushing it through the side mounting hole
  (a screwdriver works wonders here)
• Insert the cable, solder the terminals
  (and test everything! - ask me how I know)
• Glue the terminals into the printed part with some super glue