Frameless ITX case

Welcome to the Frameless ITX case design, made to be as flat as possible and featuring 3 main versions, in which the goal was to make it as flat as possible. 

It features space of 27x27x10cm, and offers a dual slot LP GPU to be placed inside, along side with 2SSDs. 

The main point of this case and what it revolved in is making sure that the CPU inlet is in the middle of the case, giving its unique look.

2 versions use laser cut panels, and are magnetic, while the 3d printed versions you have a choice between magnets and bolts.

The magnets I used for this build are really small, 5x2mm in size. 

For the large frame brackets, the need to be mirrored otherwise you won't be able to assemble the case, and a big thing in this part is to use 3mm heated inserts in lenght otherwise, it will push the plastic outwards and you will get an very ugly exterior shell.

For the other heated inserts I use the normal S version of the standard M3 inserts, that are 4mm in height.

Rest of the assembly is mostly straightforward, but I made a video of me assmebling it if you need full instructions on how I did it.

If you need it in full writing let me know I'll be rewriting this in full to accommodate that.

Hope you like it!