Sovol - MBO cover for bigger fan / SV06 ACE and SV06 PLUS ACE

Description:
This is a cover for the SV06 ACE/PLUS ACE mainboard. The cover has increased thickness and additional opening for an 80mm fan with a designated depth of 15mm. The holes at the bottom allow for better airflow and can also be used to secure additional components, such as a DC-DC converter, using zip ties.

Since most fans run on 12V, you will need DC-DC converter. I lowered the voltage even more to 8V in my setup to lower the noise while still achieving better cooling than the stock solution. The average temperature dropped from 39°C to 30°C, which is a significant 9°C difference. I connected the fan directly to 24V so that it turns on together with the printer. I do not recommend connecting it to the existing fan port.

The fan used in my case is Arctic P8 Slim (80mm).

https://www.arctic.de/en/P8-Slim-PWM-PST/ACFAN00295A

This model comes in two variants:

Standard version – for those who have an M4 insert.

Zip-tie version – for those without an M4 insert. This version includes a hole that allows the cover to be secured using a standard zip tie.

Disclaimer:
Use this model at your own risk. The author assumes no responsibility for any damage resulting from the use of this model, including but not limited to device malfunctions or electrical issues.

Different size cover with new front design