Rotating F*** Sign (Office or else)

Sometimes my colleagues need a hint of how I'm doing. And because I'm a very helpful person, I've designed this little tool for them

Printing tips
- Layer Height for the rotating sign 0.15mm (or smaller), so that the details are good
- The rest can be printed with 0.2mm
- For the stand use 15% infill and 3 perimeters
- NO AMS required! You can change the color manually at the wanted layer heights

The front plate holds without glue. Anyway, you might want to glue it to the back plate so it doesnt come loose

If wanted, I can design other back plates, if you rather want to hang the shield on a wall or else. Just let me know.

Happy printing!