Sculpfun S9 Air Assist (remix)

This is a remix of a nice model. But I the inner diameter of the air connector was to small to get a good throughput without a high pressure. Additionally i want to have an angled connector, because the silicon tubes are so soft that you get very quickly a kink in the tube.

For printing look at the second pictures, there you can see some of my fails on the right side. Raft, brim, organic supports, perimeter generator=arachne and at least 0.4 nozzle … nothing work to my satisfaction.

The best result, which work for me, you can read from the 3mf and print files 

inner diameter of air connection now 6mm, angled connection