Spiral Vase Rose with Stem

My Rose is a remix of https://www.printables.com/model/131488-spiral-vase-rose by @lytta.

My Stem is a remix of https://www.printables.com/model/136424-better-rose-stem by @Olafejs and https://www.printables.com/model/133069-spikey-rose-stemshaft by @Grafit.

If you would like to make the stem longer you can download my stem extensions here. https://www.printables.com/model/709575-better-rose-stem-extensions

I used my 95mm Rose Stem Extension in the picture.

Printer Settings

PrusaSlicer 2.9

Rose

Spiral Vase

Layer Height - .15

Solid Layers

• Top - 0
• Bottom – 7

Top and Bottom Fill Pattern - I like to use Archimedean Chords

Stem

Layer Height - .2

Perimeters – 2

Minimum Shell Thickness 

• Top and Bottom – 1mm

Seam - Random

Top and Bottom fill pattern – I like to use Concentric with the stem with leaves.

Brim – You might need to use a brim for the dowel.

Fuzzy Skin

• Outside Walls
• Thickness - .2
• Point Distance - .4

Make sure there is no Fuzzy Skin in the holes on the top and bottom. 

Do not use Fuzzy Skin on the Dowel.

If the dowel rod is a little too small or a little too big try increasing or decreasing the XY by 1 or 2%.

I use a heat gun to bend the leaves.

If you have any questions, just ask.

Please post pictures!!!

Filament used in the pictures.

Roses - Printed Solid PLA Jessie Elixir Royal Ruby

Stem & Leaves - Printed Solid PLA Jessie Green Ice

Vase - Prusa PLA Pearl White

Rose - Made the STL file smaller and added a hole in the bottom.

Stems - Added the Spikey Rose Stem Leaves to the Better Rose Stem.