The Magnetic Filter for Voron Trident
Magnetized version of The Filter that can be mounted under bed wihout messing with cables.
22
50
0
734
updated
April 3, 2025
Description
PDFWhile model have 16 hex holes for magnets it seems like only 12 are needed (2 per side) to keep everything secured.
Printed it with Fibrelogy ABS @0.2mm layer. Due to proximity to heat source PLA won't work in this scenario.
Bracket and body are symmetric, so (assuming you glued magnets right :)) filter should work in both orientation. Unfortunately, pogo connector's I've chosen have swapped polarity on each side and can't work upside down. I am planning to replace it with round pogo connector in future.
Can be used with stock top cover
BOM:
| Amount | Part | Link |
|---|---|---|
| 1 | 3Pin magnetic pogo connector | https://aliexpress.com/item/1005005697060673.html |
| 16 | 6x3mm round magnet | https://aliexpress.com/item/1005003236077815.html |
| 2 | 5015 blower fan (MF50151VX-1B00U-A99) | https://www.piekarz.pl/43940-dmuchawa-wentylatorowa-sunon-mf50151vx-1b00u-a99-dc-12v-51-7x51-6x15mm/ |
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
- 6 hex holes for 6x3mm magnets
- Replaced front pogo connector with grid
- Rounded inner corners
- Make better fit for fan
- Cut for 3 pin magnetic pogo connector
- Magnetic bracket