BrewPi-ESP8266 Box - "Discrete Component" v2.0

This is the latest version of the original case that I designed for the “main” PCB for the BrewPi-ESP project: https://github.com/thorrak/brewpi-esp8266

As the years have gone on, I have designed multiple variations of the PCB – this case is for the original PCB design, where the power supply, relay board, and “controller” PCB are all discrete components. 

This specific design is the latest one, which incorporates heat set inserts as the primary mechanism for retaining screws. This design replaces the tabbed lid with one that screws on all four corners, eliminates the vent holes on the sides, and reduces the overall filament required.

There are multiple lids available for this design, depending on the screen type you plan to use:

• LCD2004 - The original BrewPi screen, which is a 20x4 character display
• Lolin D32 Pro 2.4" TFT - Lolin's TFT designed for use with the D32 Pro, which incorporates a specific ribbon cable for connecting the TFT to the Controller
• Generic 2.8" TFT - A generic 2.8" ILI-based 320x240 pixel TFT, connected using one of several methods to the controller PCB

I am releasing both the OpenSCAD source as well as pre-rendered STL files – the STL files have had their corners filleted with a 1.5mm radius in Fusion 360.

If you would prefer not to print this yourself - or need a PCB to complete your build - I offer both the case and full kits available for sale on my Tindie store, in addition to making the source files for both the case and PCB available on GitHub.