Pneumatic-coupler for RC-models

These couplers are designed for RC-model airplanes with pneumatic landing gears as connection between the fuselage and the wings. The connectors are standard parts from LinkTech with a bayonet coupling that has to be removed before the male and the female parts are pressed fit into the printed parts. To detach the bayonet couplings from the LinkTech parts I added the tool ‘Ausdrueckwerkzeug_V2’. The couplers are designed for 4 mm thick ribs.

I use the couplers with 3x2 mm PUN tube but secure it with CA glue to the LinkTech connectors. 

Filament: PETG

Layer hight: 15 

Infill: 20%

Male connector: https://www.landefeld.de/artikel/de/kupplungsstecker-sm-mit-schlauchtuelle-pom/KSS%201%2C6%20SM%20POM

Female connector: https://www.landefeld.de/artikel/de/kupplungsdose-sm-mit-schlauchtuelle-pom/KDS%201%2C6%20SM%20POM