Lifecam VX-3000 Support for Ender-3

This is a mount for the Microsoft LifeCam VX-3000 to attach to Ender-3.

Remix of the C270 Webcam support for Ender-3. My remodel is the mount only- all other pieces created by OP Waverunner62. Cheers from Canada friend, my name is also Eric!

Used the old mount as a base to expand model to support the shape and size of the webcam I already owned, the Microsoft LifeCam VX-3000.

Printed on Ender-3 Max in about 12 hours in total. There is a clip base and a screw base to screw onto existing printer hardware. I recommend using the 45° angle screw base for stability. Print at least 3 arms for full length and maneuverability. Use supports for the camera mount piece and print vertically aligned for best results. The rest of the pieces are best printed horizontally. Zip-ties for webcam cord is not necessary but can be used if you prefer.

Hardware:
4x M4 30mm bolts
4x M4 Nuts

Print Settings

Printer:

Creality Ender-3 Max

Rafts:

No

Supports: 

Yes

Resolution:

0.2mm

Infill: 

20%

Filament:
PLA 
 

Notes: 

I used silk PLA for this project but you can use any PLA you want.

https://www.prusaprinters.org/social/210866-lunarlarceny/prints