Little Ponny - Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 55x163.62mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 1.8mm and the Actual Depth is 1.9mm

Filaments Used:
    PLA Aurapol Black Transmission Distance: 0.4
    PLA Aurapol Pink Powder Transmission Distance: 2.3
    PLA Aurapol White Transmission Distance: 2.7
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Pink Powder
    At layer #20 (1.68mm) swap to White for the rest.