SCART-SnapFit for Gscart 8:2

Snap the SCART cable in place on your gscart 8:2 SCART switch.
9
50
1
234
updated March 31, 2025

Description

PDF

SCART — it delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Securely snap the male SCART connector in place on your gRetroStuff LLC (“superg”) gscart 8:2 (aka “gscartsw”) Automatic SCART Switch with the SCART-SnapFit™.

This is designed to be compatible with standard generic SCART heads. It will not fit over larger heads such as those held together with screws, and metal heads.

The SCART-SnapFit for Gscart 8:2 is available for purchase on the Kytor Industries Store.

 

Printing:

  • Use Elegoo Rapid PETG or alternate PETG
  • PLA, ABS and ASA are not recommended
  • 0.4mm nozzle, 0.2mm height, minimum 15%+ infill, 2+ walls
  • No brim or supports necessary

Assembly:

  • Insert your male SCART cable into the gscart.
  • Drop the SCART-SnapFit over the top and snap into place.

Variants:

Revision Log:

  • Rev0 - Initial release

Note: Amazon links are affiliates.

Tags



Model origin

The author marked this model as their own original creation.

License