Adjustable, Over-Keyboard Stand for Supernote Ax2 Manta
Description
PDFA simple modification of @scaryPug's fantastic adjustable drawing tablet stand, adjusted to be a bit longer and much narrower. This is intended to hold my Supernote AX2 Manta eink tablet for note-taking, in portrait orientation.
Printed on an MK3S with E3D Revo RapidChange Nozzles and the HF 60W heater element.
- Printed the FrameFront2 part (the bottom holder that prevents the tablet sliding downwards) in Polymaker's Polylite TPU90 with a 0.6mm nozzle
- Printed the main frame legs (and the adjuster legs) in eSun PLA-CF, with a hardened 0.6mm nozzle.
- The tension adjuster knobs and inner caps I printed with a 0.25mm nozzle, using Prusament Marble Grey.
- Everything else was printed with a 0.4mm nozzle using eSun PLA+
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
My remix of @scaryPug's fantastic design adjusts the dimensions of the stand to fit the Supernote AX2 Manta eink tablet in portrait mode. I increased the length of the stand (this also means it would fit much wider keyboards) and decreased the width. I also adjusted the height and shape of the bottom holder edge (Frame_Front2) to match the thickness of the Manta, with the half folio folded open.
