Kärcher NT 2.0 to DeWalt adaptor set

This set of two adaptors facilitates the connection of a DeWalt cyclone dust separator DXVCS003 (or DXVCS002 or DXVCS001) to a Kärcher Professional vacuum with NT Bajonet 2.0 like Kärcher NT 30/1.

The (~2m) DeWalt hose is used to connect the cyclone with the vacuum. Therefore, the DeWaltHose to KaercherNT2_0 Bajonet v1 is used. 

• Print the adaptor. I used ABS with 5 walls and 20% gyroid infill. 
• Buy a Adapter für NT-Schläuche mit Bajonettverbindung 1.0 (5.031-436.0)
• Hot glue the two parts together

The longer Kärcher hose is connected to the cyclone intake with the KaercherNT2_0 to DeWalt v3 adaptor.  Therefore, you can use all the Kärcher tools / adaptors.

Electrical conductiveness was not taken into account. There might be static electricity builing up, when using this adaptor set. Perhaps you find a conductive filament?