Easter Egg - Impossible Pass-Through

The egg is 105 mm high and is completely pass-through. 

As is usual for an egg, it must be handled with care. The ribs of the outer part are only connected to the baseplate at a narrow point at the bottom. They can easily break off. The holes in the base of the outer part are there so that a piece of filament can be inserted after printing to increase stability.

The 3mf-files have set material changes and specific modifiers to make the model more stable on the base.

For the print in the photos I used dual color Overture PLA Silk (red-gold) and for the baseplate a Creality White PLA.

The model was created with FreeCAD 1.0.