Drink can dispensers

I love the can dispenser by @Enigma, but it did not fit my refrigerator.
So I created a parametric Fusion 360 model, that could be scaled to different lengths.
When using the parametric model, be careful, and  change the length in baby, ex. 50mm, steps to avoid breaking relations.
If warnings appears after changing the length select “MODIFY→Compute All” to give Fusion 360 a chance to resolve the issues. 
The fusion model contains splits for 400mm, these need to be manually removed or complemented for other lengths. 

There are .stl files for 250mm, 300mm, 350cm and 400mm deep dispensers, splitted in pieces that will fit on a Prusa Mini (18cm x 18cm).

There are connectors available for many can sizes.

If you need a connector for a can that is not available, use the parametric Fusion 360 connector model to create the connector you need. 
The Fusion 360 parameters are accessed by selecting “MODIFY→Change Parameters”. 

Inspired by this model, but in different lengths 25cm (~10 inches) 30cm, 35cm and 40cm. Support for different Can sizes, by just changing the connectors between the sides.