Elegoo Centauri Carbon - 270° Door Mod w/ Top Glass Holder

I modeled a top glass holder onto the lower hinge of the door mod by MagicShrimp. This allows both the door hinge mod as well as a top glass holder on the printer since both were not able to be used at the same time.

The rest of the required files/hardware for the door mod are found on the model by MagicShrimp.

I also modified the Upper hinge of the door mod so that there was enough clearance for the handle of the top glass to slide down.

Printed both glass holder parts vertically on the Centauri Carbon with no supports.

I modeled a top glass holder onto the lower hinge of the door mod by MagicShrimp. This allows both the door hinge mod as well as a top glass holder on the printer since both are not able to be used at the same time.

I also needed to remodel the top hinge so that the handle from the top glass could fit.