Generic HSW Storage Basket

Parametric design for HSW baskets. Various height/width/depth objects included, plus a few sizes for specific items. See photos for examples.

Print at 0.2 layer height. No supports needed.

Box Cutter: Should fit a generic Stanley knife

Pen or Clip basket: Holds any tall item

Tape Measure: Specifically sized for a Stanley Tylon 3m metric tape measure

Torch Basket: Sized for a Dremel 2200 Butane Torch with base attached.

Fusion file included in case you want to make your own sizes. As you increase width, it will add additional plugs on the back as needed.

Two caveats: In very small sizes, the hex pattern gets messed up. Try decreasing the HexGridHexDiameter parameter until it looks ok. Also, the final step is to combine all the elements into a single body. This doesn't always work because the hex pattern sometimes creates little triangles in the corners which end up being separate bodies. You'll need to manually combine into a single object in this situation.

Inspired by the Hexagonal baskets from Chrosta, but I wanted a solid bottom to prevent thin items from slipping through.