Borderlands Fight For Sanctuary intro panel art (hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:

PLA amazon black Transmission Distance: 5

PLA Generic red Transmission Distance: 5

PLA sun shiny copper Transmission Distance: 5

PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with black

At layer #8 (0.72mm) swap to red

At layer #10 (0.88mm) swap to shiny copper

At layer #14 (1.2mm) swap to White for the rest.