S500 Quadcopter Top Plate with Vibration Isolation and Raspberry Pi

This model is a replacement for the stock top plate that comes with the s500 frame kit. It includes vibration isolation for an autopilot / flight controller board and provisions to mount a raspberry pi companion / flight computer for autonomous operation. 

Extra hardware required:

1.  M3x8 Heat Set Insert (x6)
2.  M3 Standoffs
3. 10×12 vibration isolation gummies
4. M3x6 Screws (x6)

Build Settings:

1. Material  - PETG
2. Infill - 50%
3. Supports - No

I strong recommend mounting the Raspberry Pi Protection Plate as it will keep it safe (especially the GPIO) in case of mishaps where the drone flips or crashes. I say this from experience.

1. Added screw holes to attach raspberry pi plate to the s500 base plate
2. Added raspberry pi mounting plate