Bober Kurwa Beer Coaster/Bierdeckel/Beer Mats

I'm making the one and only Bober Kurwa beer mats for you. I couldn't find anything except a simple JPEG file.
Then I'll create SVGs from JPG files, etc.
You can see the results.

For perfect color matching, this is a *.step file, so you can easily see the colors in Slicer.

Beer mats
Standard diameter 107mm
Color thickness 0.6mm
Back thickness 1mm
Total thickness 1.6mm
For printing face down, it's best to use a textured plate. You'll get the best results. You can see this in the pictures I uploaded.

Holder
Four beer mats fit in the holder, leaving about 1mm of space. This way you can easily remove and replace them.

Printing time on Creality K2 Plus
4 beer mats and one holder took 2 hours 13 minutes at a layer of 0.2mm.

I hope you enjoy the one and only Bober Kurwa beer mats.

Update 12.04.2025 add new Version Bober Kurwa v4 with Holder:

Only for beer mats use the Bober Kurwa v4.step file 
only 2 (0.4mm) colored layer 

Only for the holder use the Bierdeckel Halter v6.step file
1mm more inner space to place beer mats

4x beer mats and new Version holder, only 2 (0.4mm) colored layer 
for booth parts use the Bober Kurwa v4 with Holder.3mf file