5 Minute Mystery Insert and Culprit Hider

If you want to support my work and all of the free designs I bring to the community consider buying something from my Etsy shop or my Printables Store.

____________________________________________________

Here's a little insert to make the game easier to play and store well. Not compatible with sleeves, but you can absolutely remix it to fit. Insert optional, just trying to make it fit better in the box. Printed with zero top and bottom layers and one wall to save filament.

Also includes a culprit holder! Too many games have been ruined by my over eager kids, so this little device keeps the secret safe. Print the pieces and use a strand of extra filament for the hinges. Heat the ends for 1-2 seconds and press flat against a smooth surface. Be extra careful with the inside hinges, get them as flat as possible or you won't be able to slide in the token. 

The lids are all designed to be printed flat side down, and are held on by tension. If you find them too tight or too loose you can reprint .1-.2 mm larger in the X and Y directions. Make sure to manually adjust the X and Y measurements and unlock scaling so it doesn’t scale the rest of the model.  Be aware that it will slightly loosen over time, so err on the side of tight. Make sure your adhesion is good for best results.

Happy Gaming!