Silica gel box + funnel

Two options for a simple silica gel box.
The cylindrical box has a screw cover. The block box has a sliding cover.
You can also print a funnel for easier pouring.
The parts are glued together with glue. (Except the cover)

simple and short print!


Instructions for the slicer:
- (see picture)
- wall loops = 6
- top shell layers = 0
- bottom shell layers = 0
- infill density = 20%
- infill pattern = rectilinear

There are grooves in the bottom and top where you drip glue and slide the wall around the perimeter. Then you glue the ends of the walls as well.
The box is designed to fit into the spool of filament.
The height of the box can be changed by increasing or decreasing the wall.