Ibanez RG Series Guitar - 1/3 scale model

Thanks to MalinaPL & their "Ibanez Jem mini guitar model" I was able to make a version based on my early 90's RG 450 DX.

The model is divided into 8 .3mf files and uses 5 materials (PLA Brown, *AzureBlue, Silver,Black,White @ .020). *substitute the AzureBlue for whatever Body/Head color you want.  If the filename has multiple colors listed, that run will require a color change at a specific layer.  (for more info on color changes see THIS)

***STL available but I highly suggest using my .3mf files.***

Assembly  -  Glue Is Required, please see pictures. I used Gorilla Super Glue Gel.

Each piece should fit without any issue, the head connection to the Neck may need cleaned or a bit of extra glue depending on how well the "angles" print for you.  I didn't need any glue on the top portion of the strings; the little posts that fit into the head.... and speaking of the Strings, they print very well but can be fragile mostly around the "string lock" feature and near the head pins.  Take your time inserting each string pin into the Head Holes!

Its' important to be Extra careful when removing the strings from the printer bed, and keep them as flat and straight as possible until installing. I suggest popping each head pin/string loose on the bed and then peeling the strings off holding the bridge portion. 

The whammy bar and a few pins need a bit of cleaning to remove the brim.  Remove supports from the Pickguard, Body, Neck and Head.  Most crucial glue surfaces are the Head to the Neck and the Neck to the Body.

Check out my accessories for this guitar: Scale Guitar AMP, Guitar Stand w/Cable , Guitar Strap

The guitar model has been completely separated to allow for multiple materials and color changes at specific layers.  I also included the original JEM body and Fret board/Neck as separate pieces for those wanting the original too.

I have included two versions of the Fret board; Sharktooth and Sharkfin.  Other details include 3DP strings, Ibanez logo on head, Whammy Bar, and a rounded body with strap posts, cord jack, and details on the back side.