Greeting Card Holder

You can use any print settings as you desire, but these are the ones I used.

Perimeters | 3
Layer Height | 0.15mm
Infill | 50% Cubic
Supports | None needed!
Nozzle Size | 0.40mm

If you open the .3mf in PrusaSlicer, you'll notice a modifier slab. It is just to add more infill to the bottom half of the print for more weight.

******************************************************************************

I’m a high school student who enjoys 3D modeling as a hobby. I primarily use Shapr3D for my creations, and I truly appreciate anyone who downloads my models, sells them, or remixes them. Feedback for future projects is always welcome. You are welcome to ask me for model requests and I will try to the best of my current abilities to fulfill your requests. You can ask me any question and I'll respond as soon as I'm available. Feel free to ask me for any alternate file types if you'd like to alter my models.

Thanks,
Xalibre (just an alias)