Ikea Lack Connectors and Braces

I designed these models to vertically stack two Ikea Lack tables with enough space in the middle to fit a Neptune 4 Pro. If you have a similarly sized machine, these connectors should work for you as well.

The connectors are engineered to securely hold the brace’s wedge when mounted (see images for reference). No supports are required for printing.

These are also compatible with my Lack Corner Bracket (see my profile or Lack Armor Collection).

Disclaimer: These prints are fairly heavy and intentionally over-engineered for maximum rigidity.

You will need:

• 4x Connectors (print with the flat side down)
• 4x #8 screws (5/8”)
• Optionally, up to 8 brackets (print upright) with 2x #8 screws (5/8”)

For print settings, adjust based on your needs. I used a 25% infill and a rectilinear pattern since I have considerable weight on top.

I hope this design proves helpful. Stay creative!