Bed Spring Cups

I made these bed spring cups for my Hypercube Evolution build. They are similar to the ones I made for my I3 (https://www.thingiverse.com/thing:2422944), but the springs I bought for my new build were a bit different so I took my concept for limiting spring side to side movement and tweaked it a bit. These are intended to be snug fit on the screws and springs, but should allow the spring to move up and down. I had to drill out the holes slightly for the screws.

Print instructions

Category: 3D Printer Parts Print Settings

Supports: No

Notes:

I used eSUN ePC for its extra temperature resistance over abs.