Unifi Express Gateway 10in Rack Mount with Keystone Jacks

This is designed to mount a Unifi Express Gateway to a 10in server rack. It doesn't need supports, though it will require bridging, and will be a fairly snug fit. After printing remove bridging on the back to make room for ethernet and power cables.

Print Settings:

Layer Height: 0.2mm

Wall Line Count: 4

Top/Bottom Layers: 6

Infill: Zig-Zag (Rectilinear) at 40% density

Modified to fit the Mod10 server rack (https://www.printables.com/model/1225275-modular-10-server-rack-mod10)

Changed to insert gateway from the back to sit flush with the front.

I have also created a mirrored version, to move the keystone jacks to the right hand side.