The Handsome Cableorganizer
Description
PDFYou like my Work?
Support my efforts and push the like ❤️
Make my day and post yout Makes 🤗
This Cable Organizer has some improvements and advantages compared to the existing ones. Big Version (90mm) for up to 2m Cables the regular Mini Version (63mm) is for USB-C Only up to 1m Cable.
UPDATES
28.01.22 > Added New Caps Designs (Plane and Fingerhutch)
31.02.22 > Added the Mini Version and New Caps (Plane and Fingerhutch) and I added a Mini Version with no Bridge to get in other Cables with bigger Plug
04.03.22 > New Mini version 1.3 with improved tolerances added. That some makers had reported problems.
The Design
- The cables are better protected against cable breakage due to excessive bending during winding
- Winding and unwinding is much easier due to a larger spool plate.
- Nice and handsome 😎
- Attention was paid to easy printability without support material.
Print instructions
Simple print!
No support needed!
10% Gyroid infill is sufficient!
PLA and PETG gives a very good results on 0.3mm for the Mini you need at least 0.2mm of course with original Prusament! ;-)
Happy Printing!!!
Tags
Model origin
The author marked this model as their own original creation.
