BrewPi-ESP - RJ-45 Sensor Breakout Box /w Heat Set Inserts

This is a case for the RJ-45 BrewPi Sensor Breakout PCB. This case makes it easy to mount the PCB somewhere convenient - between your BrewPi-ESP controller and your fermentation fridge.

This case is designed to be printed in two parts - a lid and a base. Brass heatset inserts are intended to be placed in each of the seven screw holes, with three M3 screws used to hold the PCB to the case base, and four M3 screws used to hold the lid to the case.

Assembly Bill-of-Materials:

• 7x M3 x 4.2 (diameter) x 6mm (length) heat set inserts
• 7x M3 x 6mm Screws
• 1x 2.5mm (small) zip tie

This design was primarily created in OpenSCAD. I have attached the source files. The “rounded edges” versions had the edges rounded in Fusion 360 after generating the STL in OpenSCAD.