Banggood frequency sniffer case. 500mhz Frequency meter

Bought a frequency scanner to get the frequencies used by other companies we work with. It came as a bare board with no case so I made this!

https://www.banggood.com/9V-Frequency-Meter-500mhz-High-Precision-Reader-RF-Radio-Frequency-Measuring-Instrument-p-1102706.html?rmmds=search&cur\_warehouse=CN

Print Settings

Printer:

Monkey Shit Fight

Rafts:

No

No

Resolution:

.2

.10

Filament: Do not click this. See below for real link PLA Red

Notes:

I use a 5 mm brim. Two layers top and bottom. %10 infill. If you over-extrude you're not going to fit this together. I don't know if I will ever get it apart! I added some foam to cushion the board and keep the battery from moving around. I included the Sketchup files if you need to mess with them (like to fit a different antenna) . You will also need a small L type male SMA antenna for this to work with the slip case I made. The 90 degree one fits in and is protected by the slip cover case.

https://www.reprapwarehouse.com/

https://www.banggood.com/5\_8G-2\_8dBi-SMA-male-RP-SMA-Male-FPV-Antenna-for-FPV-Racer-Multicopters-p-1064294.html?rmmds=search&ID=47145&cur\_warehouse=CN