GoPro Mount parametric

A GoPro Mount that I originally made for this https://www.printables.com/model/878658-garmin-mount-for-aerobars-parametric

Can be used for anything or adjusted. The hole distance is 22mm and the holes are made for standard M3 heatset inserts.

Filament: Fusrock ABS-GF 10%
Infill: 40%
Bottom/Top: 5
Wallloops: 4
Layerheight: 0.2mm

Print laying on the side with tree support but use a support blocker cylinder for the nut part (see picture)

Halt at beginning of layer 98 to place a M5 Nut (see picture)